KIA K3 2012
TOYOTA PRADO 2012
TOYOTA HIGH LANDER
Honda CRV 2012
HONDA FIT 2011
Car Accessories
HID Xenon Kit Daytime Running Light Projector Lens Car View Camera Parking Sensor Car DVD Player
HID Installation Instructions

HID Installation Instructions


1. Open the car hood, and remove the left and right front headlight assembly and front bumper, if there is enough space to install the case, you can not to pluck to check headlights or front bumper.

2.  Open the rear cover headlight assembly and remove the halogen lamps, fit halogen bulbs into models of HID headlamps. NOTE: Verify that the pressure spring in place, to see whether it will touch the hood and the head of the headlight bulbs, if necessary, tools are available to make appropriate adjustments.

3. Headlight assembly or perforated the middle of the rear and cover the gap in the neighboring to to accomplish the line group of the HID bulb placement, and shut the shade and check the seal in order to anti-water.

4. with strong double-sided adhesive or screws to fix the engine compartment Ballast. HID limit the scope of the working conditions of -40 ℃ to 100 ℃, so try to avoid the engine, water tanks, air-conditioning and other high temperature locations, choose a good location of the ventilation cooling.

5. when you close the headlight switch wiring to prevent electric shock, positive and negative wiring must be correct. Multimeter or test light can be used to confirm positive and negative lines, then large lines must be welded to prevent being exposed, so as not to affect the HID work properly.

6, because the HID and halogen light-emitting principle of distinction, each start what needs to 10A of current, fuse requirements: two lights together with a Paul Insurance wire specification 20A, and a separate fuse specification 15A.

7, check if the two headlights are working properly, if the light does not shine or flashing, please replace the battery for more than 70A (power supply shortage will be cited from this failure).

8, check the suitability of  high and low headlights, please do not put optical power to be adjusted upwards, otherwise it will affect the other drivers and driving safety.

9, under any circumstances, please do not carry out dismantling and transformation, destruction, or we will not assume any responsibility.

10, please carefully read the manual before installation and then install the HID HID Installation Instructions


1. Open the car hood, and remove the left and right front headlight assembly and front bumper, if there is enough space to install the case, you can not to pluck to check headlights or front bumper.

2.  Open the rear cover headlight assembly and remove the halogen lamps, fit halogen bulbs into models of HID headlamps. NOTE: Verify that the pressure spring in place, to see whether it will touch the hood and the head of the headlight bulbs, if necessary, tools are available to make appropriate adjustments.

3. Headlight assembly or perforated the middle of the rear and cover the gap in the neighboring to to accomplish the line group of the HID bulb placement, and shut the shade and check the seal in order to anti-water.

4. with strong double-sided adhesive or screws to fix the engine compartment Ballast. HID limit the scope of the working conditions of -40 ℃ to 100 ℃, so try to avoid the engine, water tanks, air-conditioning and other high temperature locations, choose a good location of the ventilation cooling.

5. when you close the headlight switch wiring to prevent electric shock, positive and negative wiring must be correct. Multimeter or test light can be used to confirm positive and negative lines, then large lines must be welded to prevent being exposed, so as not to affect the HID work properly.

6, because the HID and halogen light-emitting principle of distinction, each start what needs to 10A of current, fuse requirements: two lights together with a Paul Insurance wire specification 20A, and a separate fuse specification 15A.

7, check if the two headlights are working properly, if the light does not shine or flashing, please replace the battery for more than 70A (power supply shortage will be cited from this failure).

8, check the suitability of  high and low headlights, please do not put optical power to be adjusted upwards, otherwise it will affect the other drivers and driving safety.

9, under any circumstances, please do not carry out dismantling and transformation, destruction, or we will not assume any responsibility.

10, please carefully read the manual before installation and then install the HID

 

 

2011-08-02 02:46:34
腾讯微博11北京私家侦探广州私家侦探上海私家侦探深圳私家侦探北京私家侦探杭州私家侦探天津私家侦探西安私家侦探长沙私家侦探重庆私家侦探成都私家侦探福州私家侦探贵阳私家侦探哈尔滨私家侦探合肥私家侦探呼和浩特私家侦探济南私家侦探昆明私家侦探兰州私家侦探南昌私家侦探南京私家侦探南宁私家侦探青岛私家侦探厦门私家侦探沈阳私家侦探石家庄私家侦探太原私家侦探乌鲁木齐私家侦探武汉私家侦探银川私家侦探长春私家侦探公司郑州私家侦探宁波私家侦探温州私家侦探无锡私家侦探大连私家侦探东莞私家侦探泉州私家侦探苏州私家侦探扬州私家侦探珠海私家侦探甲1